Backwater valve ø 50

Vertical Backwater valve ø 50

Anti-flood devices protect interiors from flooding caused by sewage backflow. Karmat non-return valve ø 50 is an ideal solution where it is impossible to install a non-return valve to protect the whole building e.g. in an apartment block.

The backwater valve ø 50 in version P is fitted in the vertical course of ø 50 sewage pipework attached to the wall by means of brackets.
A backwater valve installed in such a way can protect several facilities at the same time if they are connected to the same sewage system such as a bath or shower base traps.

Backwater valve ø 50 VERSION A for horizontal installation

The backwater valve ø 50 in version A is fitted in the horizontal course of ø 50 sewage pipework attached to the wall by means of brackets.

A non-return valve installed in such a way can protect several facilities at the same time if they are connected to the same sewage system such as a bath or shower base traps.

Backwater valve ø 50

ZB50-A biała

ZB50-A pop

ZB50A orange

Backwater valve ø 50

Installed onto sewage pipes ø 50, weight: 0,15 kg

Backwater valve ø 50 VERSION B for horizontal installation

The backwater valve in version B is connected to the ø 50 pipe socket of an existing pipe fitting in the wall.

A special aesthetic masking rosette allows the valve to be mounted to the wall by means of two screws.

This protects the system from self- detachment in cases of increased pressure in the system caused by sewage backflow.

To the device mounted in a such way, the trap (e.g. a washbasin) is to be connected by means of a special connector with a screw cap.

Backwater valve ø 50

ZB50-B biała

ZB50-B pop

Backwater valve ø 50

Installed onto sewage pipes ø 50, weight: 0,17 kg

Backwater valve ø 50 VERSION C for horizontal installation

Backwater valve ø 50 in version C is designed for installation in new or altered sewage systems.

It is mounted to the wall by means of a special ø 50 elbow which is to be connected to the valve with a special nut, that also takes the role of a masking rosette at the same time.

The backwater valve ø 50 in version C is designed for installation in new or renovated buildings.The elbow enables to orient the outflow, at any angle, to the left or to the right and protects the system from self-detachment in the case of increased pressure in the sewage system caused by sewage backflow.

Backwater valve ø 50

ZB50-C biała

ZB50-C pop

Backwater valve ø 50

Installed onto sewage pipes ø 50, weight: 0,22 kg

The Karmat company possesses 15 products with have to which have be reserved in the Polish Patent Office.

Installation method of ø 50 backawter valves

With the aim to make installation easier, KARMAT produces the ø 50 backwater valve in versions A, B, C as well as in vertical. They are used in all sewage-related systems such as washbasins, sinks, shower bases, dishwashers and washing machines.

Manufactured in different versions making installation possible into any type of system
Designated for installation inside a house or a flat
Aesthetically designed

Method of connecting traps to the valves in version B and C

Trap is easily and tightly connected to the valve by means of a nut and conic gasket.

Proper mounting of the backwater valve in version C

When mounting the elbow to the wall, it is necessary to leave outside 11 to 13,5 mm of screw-thread. Fixing the valve to it, is easy due to a nut and special gasket.

Comfortable manual closure

Backwater valve ø 50 version C

Efficient protection against rodents

Compatible with the standard, the safe distance of the bottom of the casing ensures proper operation and allows for the self-cleaning of the valves
The shape of the chromium-nickel stainless steel guard protects the flap and gasket from damage by rodents and the slipping of the seals during sewage flow.
Smooth and properly shaped internal surface allows free flow of sewage and makes the accumulation of deposits or the blocking up of the valve impossible

All ø 50 backwater valves have a convenient maintenance lever. A small move of the lever blocks the flow quickly and efficiently. This allows to protect premises from unpleasant odours in case of a household sewage system being unused for a longer period of time.

Technical drawing

ZB 50-A

ZB 50-B

ZB 50-C

ZB 50-P

Flap valves

KARMAT Flap valves

Flap valves effectively protect plumbing systems from rats entering the buildings

flap valves and drainage flap valves are made from polypropylene of the highest quality with a supplemented regulator which increases the resistance to sunbeams as well as other atmospheric factors.
a market novelty, it is a specially constructed drainage flap valve wich protects drainage installations against backward flooding and silting do to increasing water levels above the drainage level
the drainage flap valve is installed directly onto the end of a drainage pipe leading to the drainage ditch or a drainage well

types of flap valve
technical drawings

TYPES OF FLAP VALVE

Flap valve ø 110

ZBK 110 - installed onto sewage pipes ø 110, weight: 0,33 kg

Flap valve ø 160

ZBK 160 - installed onto sewage pipes ø 160, weight: 0,73 kg

Flap valve ø 200

ZBK 200 - installed onto sewage pipes ø 200, weight: 1,16 kg

Flap valve ø 250

ZBK 250 - installed onto sewage pipes ø 250, weight: 2,25 kg

Flap valve ø 315

ZBK 315 - installed onto sewage pipes ø 315, weight: 3,90 kg

Drainage flap valve with universal coupler

ZBK-DR - installed onto drainage pipes from ø 72 to ø 100, weight: 0,36 kg

technical drawings

Flap valve ø 110

ZBK 110 -installed onto sewage pipes ø 110, weight: 0,33 kg

Flap valve ø 160

ZBK 160 -installed onto sewage pipes ø 160, weight: 0,73 kg

Flap valve ø 200

ZBK 200 - installed onto sewage pipes ø 200, weight: 1,16 kg

Flap valve ø 250

ZBK 250 - installed onto sewage pipes ø 250, weight: 2,25 kg

Flap valve ø 315

ZBK 315 - installed onto sewage pipes ø 315, weight: 3,90 kg

Drainage flap valve with universal coupler

ZBK-DR -installed onto drainage pipes from ø 72 to ø 100, weight: 0,36 kg

The Karmat company possesses 15 products which have been reserved in the Polish Patent Office

Reliable and effective connection

Flap valves and drainage flap valves are made from polypropylene of the highest quality with a supplemented regulator which increases the resistance to sunbeams as well as other atmospheric factors. Polypropylene is harmless to the natural environment, resistant to high temperatures (up to 95°C) as well as aggressive chemical agents present in plant protection products.

A drainage flap valve has a universal connection system consisting of popular Karmat drainage couplers, which enables its installation on drainage pipes or corrugated pipes without holes, from 72 to 100 mm diameter.

All flap valves are equipped with a chromium-nickel cover protecting the flap and gasket. Additionally a chromium-nickel cover A of the lever B has been introduced. They protect against rodents, atmospheric and the environmental conditions (eg. river flow).

Our company uses 100% of the raw material this way, zero post-production waste is created

Example of the assembly of the flap valve and drainage flap valve draining water to a drainage ditch.

Flap valves are mounted by installers onto the ends of sewage pipes draining into collection wells, septic tanks as well as on drainage pipes draining rain water into ditches or rivers.

Flap valve ø 110 in a ø 315 collection well

Example of the assembly of the flap valve and drainage flap valve draining water to a drainage ditch.

Backwater valves

Karmat has been producing a wide range of, tested in use, anti-flooding devices which protect any buildings regardless the type of installation used.

Backwater valves

Backwater valve for vertical assembly

Double flap backwater valve

Flap valves

Backwater valve ø 50

Backwater valve for vertical assembly

Karmat offers a unique product on the market - a backwater valve designed for vertical installation

Backwater valves mounted vertically operate automatically and reliably
Automatic shut-off during back flow
The valve has passed a series of test required by the EN 13564 standards and received the CE symbol

Vertical Backwater valve
technical drawing

VERTICAL BACKWATER VALVE

Backwater valve ø 50 for vertical installation

ZB50-P biała - Installed onto sewage pipes ø 50, weight: 0,15 kg

Backwater valve ø 50 for vertical installation

ZB50-P pop - Installed onto sewage pipes ø 50, weight: 0,15 kg

Backwater valve ø 110 for vertical installation

ZB 110 PION - Installed onto sewage pipes ø 110, weight: 0,97 kg

Backwater valve ø 125 for vertical installation

ZB 125 PION - Installed onto sewage pipes ø 125, weight: 1,24 kg

Backwater valve ø 160 for vertical installation

ZB 160 PION - Installed onto sewage pipes ø 160, weight: 2,03 kg

TECHNICAL DRAWING

Backwater valve ø 50 for vertical installation

ZB50-P biała - Installed onto sewage pipes ø 50, weight: 0,15 kg

Backwater valve ø 50 for vertical installation

ZB50-P pop - Installed onto sewage pipes ø 50, weight: 0,15 kg

Backwater valve ø 110 for vertical installation

ZB 110 PION -Installed onto sewage pipes ø 110, weight: 0,97 kg

Backwater valve ø 125 for vertical installation

ZB 125 PION - Installed onto sewage pipes ø 125, weight: 1,24 kg

Backwater valve ø 160 for vertical installation

ZB 160 PION - Installed onto sewage pipes ø 160, weight: 2,03 kg

The KARMAT Backwater valves are the only ones possessing a chromium-nickel guard which protect the flap and seal against rodents

Simple control of proper operation

The designed manual closure, allows you to use it also in a vertical position. It also provides the possibility to verify proper valve operation without removing the cover

Backwater valves mounted vertically operate automatically and reliably.

Simple means of assuring proper operation. Changing of the lever from OPEN position A to CLOSED position B causes a complete arrest of sewage backflow.

A Backwater valve mounted on a vertical drain pipe

is a comfortable, cheap and often the only way of protecting a building against fooding.

THE POSSIBILITY OF MOUNTING ON A VERTICAL PIPE MEANS NO NEED FOR CONVERSIONS AND LOWER COSTS

Our company uses 100% of the raw material this way, zero post-production waste is created.

Comfort and safety

THE POSSIBILITY OF MOUNTING ON A VERTICAL PIPE MEANS NO NEED FOR CONVERSIONS AND LOWER COSTS

Effective rodent protection
The guard protecting the flap as well as all mounting elements (screws, nuts and washers) are made from chromium-nickel
KARMAT backwater valves are equipped with a manual closure lever
Changing of the lever from OPEN position A to CLOSED position B causes a complete arrest of sewage backflow

effective rodent protection

guard protecting the flap is made from chromium-nickel

KARMAT backwater valves are equipped with a manual closure lever.

all mounting elements (screws, nuts and washers) are made from chromium-nickel

The universal backwater valve

The universal backwater valve for chamber bases of various producers and for concrete wells

Just as all the other Kramat backwater valves, they effectively protect buildings from the backflow of sewage and rain water.
It has been designed to be installed in pre-existing systems without the need for modifications.
Its design allows for easy installation inside most of the chamber bases, sewage and rain water wells available on the market as well as on the ends of sewage and rain water pipes emptying into concrete wells.

Universal backwater valve for concrete wells

readmore...

The universal backwater valve for chamber bases of various producers

readmore...

Universal backwater valve for concrete wells

A device which can be installed in pre-existing concrete wells.

Installed in the outlet of a sewage pipe in pre-existing concrete wells.
For use in wells with or without manhole openings.
Mobile unit can be removed above ground with the help of the aluminum rod and handle without entering the well.
When there is a reverse flow, it is stopped by the flap which securely seals to the head of the backwater valve.
Possibility of installation on the cemented outlet of a storm water pipe emptying into rivers or reservoirs.
Chromium-nickel protective guard securing the flap and gasket against rodents which also prevents them from entering the building.

The Universal Ø110 Backwater Valve for concrete wells (with removable flap) UZBBW110 (140cm rod and handle included in the set)

Mobile unit can be removed above ground with the help of the rod and handle without entering the well.

Possibility of installation on the cemented outlet of a storm water pipe emptying into rivers or reservoirs.

Universal backwater valve Ø110 for concrete wells UZBB110

Installed in the outlet of a sewage pipe in pre-existing concrete wells.

A special, and pattented by Karmat, finned seal allows for a perfect seal of the valve to the inner wall of the Ø110 pipe

Scrupulously designed finned seal adheres perfectly to the inner walls of the Ø110 pipes regardless of its thickness – this aspect means that a liquid flowing through does not encounter any obstruction.

The universal backwater valve for chamber bases of various producers

A device which can be installed in pre-existing chamber bases made of plastic. Effectively secure buildings against flooding caused by backflow of storm water and sewage.

Possibility of removal of the mobile unit above ground without the need of entering the well.
Possibility of extending the rod to several meters.
Chromium-nickel protective guard securing the flap and gasket against rodents which also prevents them from entering the building.
Low cost and simple installation.